Package Contents; Installation Overview - STEINEL TR 100-M Manual Del Usario

2
WARNING
• Turn power off at the circuit breaker before
installing the power pack
• Power Pack must be installed and used in
accordance with appropriate electrical codes and
regulations
• Installation by a qualified electrician is
recommended

Package Contents

• One TR 100-A, TR 100-M, TR 150-A or TR 150-M
power pack
• Two lock nuts
• Installation instructions
www.steinel.net
(800) 852-4343

Installation Overview

Needed for installation
• Power packs should be
installed according to
state, local and national
electrical codes and
requirements.
• Low voltage wiring:
at least 22-gauge High
voltage wiring: at least
14-gauge
• For plenum return
ceilings, use UL listed
plenum-approved cables.
www.steinel.net
Intended uses
• For indoor use only
• The power pack can be
used as a standalone
unit, low voltage switch,
or can be wired to a
sensor for automated
control.
(800) 852-4343
3