Alcad 912-TP Serie Manual De Instrucciones página 28

2.1 Description of the FA power supply
1- Mass connection
2- Indicator of correct operation
3- Overload indicator
4- Power / Control output connector
5- Connection cable to the mains
6- Supply / Control cable
7- List of technical characteristics
2.2 Description of the amplifier
8- Signal output F connector
9- F-connector for output signal testing at -30 dB
10- Operating indicator
11- Power / Control output connector
12- Level regulator of the output signal
13- Input F connector from the transmodulators
14- F-connector for the extension signal input
15- Mass connection
16- 75Ω F loads
17- F-connectors
18- List of technical characteristics
2.3 Description of transmodulators
19- F-connector for satellite signal input from upstream transmodulator or
from an external LNB unit
20- F-connector for satellite signal output to downstream transmodulator
21- Output voltage switch for the external LNB unit
22- QPSK satellite transponder hook-up Indicator
23- Notch for CAM module connection
24- Infrared receiver
25- Programming indicator
26- Program mode switch
27- Infrared emitter
28- The right unpacking of the TV program
29- Correct HF output channel Indicator
30- Power / Control output connector
31- Level regulator of the output signal
32- F-connector for RF signal input from upstream transmodulator
33- F-connector for RF signal output to downstream transmodulator or
amplifier
34- Mass connection
35- Upper and lower bridges (41,5 mm)
36- List of technical characteristics
Serie 912 - TP ENG - 27