Descargar Imprimir esta página
Eaton Cooper Lighting Metalux 40SLSHP3840ND Guia De Inicio Rapido
Eaton Cooper Lighting Metalux 40SLSHP3840ND Guia De Inicio Rapido

Eaton Cooper Lighting Metalux 40SLSHP3840ND Guia De Inicio Rapido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

40SLSHP3840ND-120V
(3800 Lumen Model)
40SLSHP4840ND-120V
(4800 Lumen Model)
ENGLISH
ITEMS REQUIRED
(Purchase separately)
• Stud mount - (2) #8 or larger open screw eyes 1¾" long with 1¼" of wood screw length.
• Drywall mount - (2) 3/16 or larger diameter toggle eyebolts 2 7/8" long with (2)
tapered wings.
• Pliers
• Drill for Drywall mount
WARNINGS AND CAUTIONS
• For suspended mount only, Do not surface mount.
• Do not install on a radiant-heating ceiling.
• Do not use in wet location.
• Only install using length of chain as provided with luminaire.
• Minimum operating room temperature of -20˚C
recommended.
• This unit is intended to be installed directly below receptacle.
• Never alter length of power cord.
• Mounting hooks should engage the chain only, product is not intended to be suspended by
the electric cord set.
• Fixture should be installed by persons with
experience in household wiring or by a qualified
electrician. The electrical system, and the method
of electrically connecting the fixture to it, must be
in accordance with the National Electrical Code and
local building codes.
INSTALLATION INSTRUCTIONS
1. Before installation, plug fixture (A) into a 120V, 60Hz
electrical outlet to check for proper operation. Then
unplug and begin the installation. DO NOT
ATTEMPT TO INSTALL WHILE PLUGGED IN.
2. Take the fixture out of the packaging, removing
packaging end caps and plastic bag.
3. Product may be suspended mounted to either a
stud or dry wall. Mounting hardware should be
mounted 25 3/4 apart from each other.
A. For stud mount applications (Fig. 1) insert (2) #8
Questions?/ ¿Preguntas?/Questions ? 1-800-334-6871 ConsumerProducts@eaton.com
PACKAGING CONTENTS/CONTENIDO DEL PAQUETE/ CONTENU DU PAQUET
A. Fixture housing
Carcasa de la lámpara
Boîtier du luminaire
1
Open screw eye
Joist
Toggle bolt
#8 or larger open
3/16 or larger
screw eye
toggle bolt
Instruction Manual/Instrucciones/Directives
B. (2) Mounting chains
(2) Cadenas de instalación
(2) Chaînes de montage
or larger diameter open screw eye hooks (sold
separately) into a wood joist.
B. For drywall mount applications (Fig. 1) drill a 1/2
inch hole into the ceiling. Using a 3/16 or larger
diameter threaded eyebolt (sold separately) thread
toggle wings onto eyebolt. Fold wings against
threaded eyebolt ensuring wings fold towards the
eye loop. Next push the eye bolt and wings through
the drilled hole until spring opens wings on back
side of drywall. Pull eyebolt down to allow wings to
grab the drywall. Turn the eyebolt clockwise
tightening it against drywall.
4. Locate mounting hooks on backside of LED Shop
light housing (Fig. 2A). Squeeze hooks and
dis-engage them from the back of the housing. Take
each hook and loop it into the provided hanging
chain. Squeeze hooks and re-engage these hooks
into back of housing (Fig. 2B).
5. Hang one chain (B) on each open screw eye. Level
the fixture (A) by increasing or decreasing the
number of chain links between the open screw eye
and the slot on the fixture (A). Make sure the
number of links on each chain (B) is the same. This
will ensure that the fixture (A) hangs level (Fig. 3).
6. Crimp the screw eyes with pliers to secure the
chain (B) (Fig. 4).
7. The distance between the cord end of fixture (A)
and electrical outlet shall be within 5 feet.
8. Add pull string (C) to pull chain if desired.
ENERGY STAR
®
ENERGY STAR
Protection Agency & U.S. Department of Energy.
Visit www.energystar.gov to learn more.
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Eaton's Cooper Lighting Business ("Eaton's Cooper Lighting") warrants to customers that, for
a period of five years from the date of purchase, Eaton's Cooper Lighting Business ("Eaton's
Cooper Lighting") products will be free from defects in materials and workmanship. The
obligation of Eaton's Cooper Lighting Business ("Eaton's Cooper Lighting") under this warranty
is expressly limited to the provision of replacement products. This warranty is extended only
to the original purchaser of the product. A purchaser's receipt or other proof of date of original
purchase acceptable to Eaton's Cooper Lighting Business ("Eaton's Cooper Lighting"). This
is required before warranty performance shall be rendered. This warranty does not apply
1
C. Switch pull string
Cuerda interruptor
Corde de commutateur
2
A
B
3
B
4
Open
B
®
is sponsored by the U.S. Environmental
B
Closed
B

Publicidad

loading

Resumen de contenidos para Eaton Cooper Lighting Metalux 40SLSHP3840ND

  • Página 1 Eaton’s Cooper Lighting Business (“Eaton’s Cooper Lighting”) warrants to customers that, for unplug and begin the installation. DO NOT a period of five years from the date of purchase, Eaton’s Cooper Lighting Business (“Eaton’s ATTEMPT TO INSTALL WHILE PLUGGED IN.
  • Página 2 Reproductions of this document without prior written approval of Eaton’s Cooper Lighting Business (“Eaton’s Cooper Light- luminaria (A). Asegúrese de que el número de esla ing”) are strictly prohibited.
  • Página 3 6. Repliez les crochets des vis à crochet avec une pince pour immobiliser la chaîne La reproducción de este documento sin la aprobación previa por escrito de Eaton’s Cooper Lighting Business (“Eaton’s (B) (Fig. 4).

Este manual también es adecuado para:

Cooper lighting metalux 40slshp3800ndCooper lighting metalux 40slshp4840ndCooper lighting metalux 40slshp4800nd