Peggy Sage Purple Instrucciones De Uso página 4

[EN] Thank you for purchasing this Peggy Sage manicure lamp. We strongly recommend that you read these usage
instructions in full before using your lamp to ensure you enjoy its full functionality and safe use. Please read the usage
instructions carefully and keep them for future reference.
1. Intended use
The Purple LED lamp from Peggy Sage is an innovation in hybrid technology. It features 24 LED/UV bulbs with a power output
of 36 W and will catalyze all your semi-permanent nail lacquers and UV/LED gels. It is particularly suitable for home use.
LCD display, 3 timer buttons (30s/60s/90s), the 90s timer features a gradual power increase function (50% power for the
first 45s and then 100% power, to prevent any feeling of overheating for maximum comfort). Sensor and auto-on feature.
Removable base. Spacious design for optimum use in both manicures and pedicures.
It must only be used indoors in a dry place and must be connected to a 220-240V AC power supply at 50/60 Hz. The device
must only be used with the transformer unit supplied with the device. For safety and approval reasons (CE marking), any
non-authorized conversion and/or modification of this device is not permitted. Any use other than that described above is
prohibited. Such use may damage the product and may pose a risk of short circuit, fire, electric shock, etc.
2. Package contents
LED lamp • Transformer plug • Usage instructions • Guarantee certificate
3. Safety instructions
We accept no liability for damage caused by improper use or failure to follow the usage instructions of this device,
which will also render the warranty null and void.
This device can be used by children aged 8 and over and by people of reduced physical, sensory or intellectual
capacity or by inexperienced and/or unknowledgeable people providing they are correctly supervised or
providing they have been given instructions on how to use it safely and they have understood the risks arising
from its use. Children must not play with this device. User cleaning and maintenance must not be carried out
by unsupervised children.
• Do not subject this product to high mechanical stress.
• This product must not be exposed to extreme temperatures, direct sunlight or intense vibration.
• Any maintenance or repair work must be carried out only by a specialist or specialised workshop.
• If you have questions about anything not covered in these usage instructions, please contact our technical department.
When using electrical appliances, particularly when children are present, basic safety regulations must be applied,
particularly the following :
DANGER : to reduce the risk of electrocution :
• Do not place the device near water • Do not use in the bath or shower
• Do not touch an electrical device which has fallen into water. Unplug it immediately.
WARNING : to reduce the risk of burning, electrocution, or injury :
• Do not leave the device without supervision • Do not pull on the power cord • Do not use the device if its cord is damaged
or if it is not working properly • Keep the power cord away from any source of heat • Always unplug after use • Do not use
the device if it is damaged, or if it has fallen or fallen into water. Return the device to the repair department • Do not use
if the timer is faulty • Do not use outside or anywhere where aerosols or oxygen are in use.
4. Using the lamp for the first time
1. Remove the plastic protection tabs from the detachable magnetic hand rest inside the lamp.
2. Position the lamp with the opening facing the user.
3. Insert the plug into a mains socket.
4. Press the selection button to select your required time and function. Press this button again to deactivate the timer. Insert
the hand or finger(s) into the opening in the lamp and leave it/them in position until the lamp bulbs have switched off,
indicating that the process is complete.
5. Disposing of your lamp
To preserve, protect and improve the quality of the environment and to safeguard human health and make careful use of
natural resources, the user is requested to take this device to an appropriate waste-recycling centre in compliance with the
applicable regulations. The crossed-out waste bin symbol means that this product must be treated separately and not as
household waste.