Infosec E3 PERFORMANCE 5000VA Manual De Usuario página 31

2. Before carrying out any kind of service or maintenance, disconnect the batteries and
verify that no current is present and no hazardous voltage exists in the terminals of high
capability capacitor such as BUS-capacitors.
3. Do not dispose of the battery in a fire as it may explode.
4. Do not open or damage the battery! The electrolyte, fundamentally sulphuric acid,
can be toxic and harmful to the skin and eyes. If you come into contact with it, wash
thoroughly with water and clean dirtied clothes.
5. Do not throw the battery into a fire. It may explode. It has to be disposed of separately
at the end of its useful life. Refer to local legislation and regulations.
6. The UPS contains one or two large-capacity batteries. To avoid any danger of electric
shock do not open it/them. If a battery needs servicing or has to be replaced, please
contact the distributor.
7. Servicing should be performed or supervised by competent personnel who take the
necessary precautions. Keep unauthorised personnel away from batteries.
8. A battery may present a risk of electric shock and cause short circuits. The following
precautions should be taken by the qualified technician:
Remove watches, rings or other metal objects from hands.

Use tools with insulated handles.

Disconnect the charging source prior to connecting or disconnecting battery

terminals.
When replacing batteries, use the same type and number of sealed lead-

acid batteries.
9. Batteries with minimum case flame rating V-2 are intended for use in a computer room
as defined in the Standard for the Protection of Information Technology Equipment,
ANSI/NFAP 75. Batteries with case flame rating HB are not intended for use in a computer
room. (US installations only.)
A F T E R S A L E S S E R V I C E
IMPORTANT!
When calling the After-Sales Department, please have the following information ready, it will
be required regardless of the problem: UPS model, serial number and date of purchase.
Please provide an accurate description of the problem with the following details: type of
equipment powered by the UPS, indicator led status, alarm status, installation and
environmental conditions.
You will find the technical information you require on your guarantee or on the identification
plate on the back of the unit. If convenient you may enter the details in the following box.
M o d e l
E3 Performance ...
!
Please keep the original packaging. It will be required in the event the USP is returned to
the After-Sales Department.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 12 18 AA 59 205 19
S e r i a l n u m b e r D a t e o f p u r c h a s e
31