Operating Modes; Lcd Displays - Infosec E3 PERFORMANCE 5000VA Manual De Usuario

3.6 Operating mode and description
Operating
modes
When the input voltage is within voltage
regulated range, UPS will power the output
directly from the mains. ECO is the
ECO mode abbreviation of Efficiency Corrective
Optimizer. In this mode, when the battery is
full charged, the fan stops working for an
energy saving.
Buck mode When the input voltage is higher than the
when AC is voltage regulation range but lower than high
normal loss point, the buck AVR will be activated.
Boost mode When the input voltage is lower than the
when AC is voltage regulation range but higher than low
normal loss point, the boost AVR will be activated.
When the input voltage is beyond the
acceptable range or power failure and alarm
Battery mode
is sounding every 10 seconds, UPS will
backup power from battery.
UPS is powered off, there is no output
Standby mode supply power, but the batteries can be
charged.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
50
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 12 18 AA 59 205 19
Descriptions

LCD displays