Symbols Used In The Manual - Crown CT19024K Manual Original

• If you are going to thaw a water pipe, make sure that
this it is in fact a water pipe - not a gas one - because
heating a gas pipe may cause an explosion�
During operation
• Operating the power tool in the rain, snow or in high
humidity environments (bathrooms, saunas, etc�) is
prohibited�
• While operating do not point the nozzle at yourself,
other people or animals, and do not touch the nozzle
or the surface that you have heated - you may be badly
burnt�
• Do not close ventilation slots of the hot air gun, do
not close the nozzle of the hot air gun and do not hold
the nozzle too close to a work surface - this will cause
the power tool to overheat and break down�
• Ensure proper ventilation in the room where opera-
tion will take place - gases and vapors generated dur-
ing operation may be harmful to your health�
• Wear safety goggles and gloves during operation�
• Do not direct the hot air flow to the same place for
a long period of time - heat treatment of lacquer and
paint coatings may produce highly flammable gases.
• Do not work next to highly inflammable liquids, gas-
es and items (timber, paper, etc�)�
• Beware of ignition of surrounding objects due to high
temperature of an air flow. Remember, invisible design
components (wooden beams, insulation materials,
etc.) can catch fire as well.
• During a steady-state operation put the power tool
on a horizontal dry surface to avoid its toppling� Do not
leave the power tool running unattended�
After finishing operation
• After the final shut-off, examine a place where works
were carried out, do not leave decaying subjects - they
can cause a fire.
• After operating the power tool, let the nozzle cool
down completely, and only then remove the power tool�

Symbols used in the manual

Following symbols are used in the operation
manual, please remember their meanings� Correct
interpretation of the symbols will allow correct and safe
use of the power tool�
Symbol Meaning
Hot air gun
Sections marked gray - soft
grip (with insulated surface)�
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Symbol
English
16
Meaning
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Wear protective gloves�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Ensure adequate operation
room ventilation�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Double insulation / protec-
tion class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Do not dispose of the power
tool in a domestic waste
container�