Security - Longshine 11n 1T1R Serie Manual De Usuario

Beacon Interval
Preamble Type
RF Output Power
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.

3.4.3 Security

The Security function protects your wireless network from invasion. We provide WEP and WPA
encryption to secure your wireless network. Please select "Disable" , "WEP" , "WPA" , "WPA2",
or "WPA2-Mixed" in the drop list. If you select "Disable", any data will be transmitted without
encryption and any station can access the router.
Items
Select SSID
Encryption
Show Password
modifications to the value range between 0 and 2347 are
recommended.
Beacons are packets sent by an access point to synchronize a
wireless network. Specify a beacon interval value. Default (100ms)
is recommended.
The length of CRC blocks in the frames during the wireless
communication.
Select the signal strength for the wireless network.
Information
Please choose a SSID you have set for this router in the
Basic Settings from the drop-down list. The SSID will be shown on
the wireless network for recognizing.
There are 5 modes for you to select: Disable, WEP, WPA, WPA2,
and WPA2-Mixed. Please refer to the following description.
Select to show the password or not.
Wireless 11n 1T1R Router
25
Wireless >