Tcp/Ip Settings; Lan Interface Setup - Longshine 11n 1T1R Serie Manual De Usuario

If you are under the Client mode, the interface is different.
Click Wireless > WPS in the menu links to display the screen as shown below.
In this page you can connect your device to other networks by using PIN or PBC methods
.
Items
Disable WPS
Self-PIN Number
PIN Configuration
Push Button Configuration
3.5

TCP/IP Settings

3.5.1 LAN Interface Setup

To set up the configuration of LAN interface, private IP of your router LAN port and subnet mask
for your LAN segment.
Wireless 11n 1T1R Router
Information
Mark to disable the WPS, and clear to enable.
If you use this device as a client, you can use this code
when trying to connect this device to other AP by using
the PIN method.
After the AP or router you share has fill in your self-pin
number and click the
at this moment you can click the
minutes to establish the connection.
You can simply click the
button) together with the AP or router you want share in 2
minutes for connection.
37
button in this GUI page
button in 2
button (or the WPS