Access Control; Wireless Site Survey - Longshine 11n 1T1R Serie Manual De Usuario

3.4.4 Access Control

To restrict the station access authentication of the clients, you can set up the control list in this
page.
Items
Wireless Access
Control Mode
MAC Address &
Comment
Current Access
Control list
* Please click on the Apply Changes button or the Reset button to save/reset the configurations.
3.4.5 Wireless Site Survey (only in Client mode)
If you are under the Client mode, click Wireless > Wireless Site Survey in the menu links to
display the screen as shown below.
1. The following page which provides tool to scan the wireless network pops out.
Information
Click the drop list to choose the access control mode. You may select
"Allow listed" to give those MAC addresses access to this device or select
"Deny Listed" to ban it or select "Disable".
Fill in the MAC address that you wish to control, and give a definition to it.
List the MAC Access Control settings you have added before. Click on the
list to change configuration. To Delete the station on the list, mark the
check box in the select item and click the "Delete Selected". If you want to
delete all stations on the list, click "Delete All" to remove all of them.
Wireless 11n 1T1R Router
30