Ignition Switch; Headlamp Switch - CLIPIC RADAR 125CC Manual Del Usuario

Components and devices
4

IGNITION SWITCH

It locates in the middle of meter boards.
OFF ( ): A11 circuits are cut off. Engine couldn't be star-
ted; Key can be taken out.
ON ( ): All circuits are closed, and engine could be star-
ted; Key can't be taken out
STOP (P): All circuits are cut off except the circuit of posi-
tion lamp and tail lamp; Key can be taken out.

HEADLAMP SWITCH

There are three running positions on headlamp switch, i.e.
'H', 'P' and ,' ', the last one is on the right side of 'P' with
grey mark.
H: When switch is turned to this position, the head, rear, po-
sition and meter lamps can be lighted
P: When switch is turned to this position, the position, rear
ON
and meter lamps can be lighted.
OFF STOP
" " (grey mark)When switch is turned to this point, the
headlamp, tail, position and meter lamps could be extinguis-
hed.
74