Throttle operation
DRIVING CHAIN
Driving chain adjustment
Inspect driving chain that if it looks very dry, a layer of lubri-
cant should be smeared.
1. To prop Motorcycle with central support. Use your hand
to pull the driving chain(l), and your finger to press the chain
5
4
between two chain wheels testing its tension. Adjusted the
chain sag to 20mm or so.
2. To adjust chain sag, firstly loosen up two lock nuts (2)
.then adjust lock bolt(3). Loosen up axle bolt (4). Please pay
attention to chain adjusters on both side should situate the
same position of inner-gauged mark (5).
2
3
95