Finding Paired Naída Cis - Advanced Bionics myPilot Manual Del Usuario

Pair Devices
The second item in the Pairing Menu, entitled Pair Devices, will show the Naída CIs that have
been paired to the AB myPilot. The checks in green circles indicate the Naída CI(s) are currently
paired to the AB myPilot. These Naída CIs can be unpaired by selecting the initials of the paired
processor 's recipient and pressing the home button, causing the checkmark to disappear. The
unchecked Naída CIs are no longer paired to the AB myPilot.
The pairing menu can list up to 20 Naída CIs. The most recently paired Naída CIs will be found
at the top of the list.
To Unpair
To unpair the AB myPilot and all Naída CI(s), the recipient must do the following:
1
Select the center button. From the main
menu, select Setting
3
From the Pairing menu, select Clear Pairing.
12
AB myPilot User Guide
2
From the Settings menu, select Pairing.
4
The AB myPilot will ask you to confirm.
Once you do, the screen Pairing IDs
Reset will be displayed.
Naída CIs can also be unpaired one at a time.
1
Press the center button; from the main
menu, select Settings.
3
From the Pairing menu, select either Scan
for Devices or Pair Devices. From either of
these menus, you will see the check in the
green circle by the paired Naída CIs.
Finding Paired Naída CIs
The recipient is able to identify which Naída CIs are paired to the AB myPilot. To access this function:
1
Press the center button, select Settings,
select Pairing, and then scroll down to Find
Paired Device.
2
From the Settings menu, select Pairing.
4
To unpair, scroll to the Naída CI with the check
you wish to unpair and press the center button,
causing the checkmark to disappear. The
unchecked Naída CIs are no longer paired to
the AB myPilot.
2
A paired Naída CI will blink its LED. A paired left
Naída CI will blink green four times. A paired
right Naída CI will blink red five times.
AB myPilot User Guide
13