Assembling The Freezer Drawer; Connecting The Water Line; Before Beginning - LG LMWS27626 Serie Manual Del Usuario

Ocultar thumbs Ver también para LMWS27626 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembling the Freezer Drawer

Assembling the lower freezer drawer in the same
way.
1
Pull out both rails simultaneously, until they
are fully extended.
2
Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
CAUTION
• Do not hold the handle when removing or
replacing the drawer. The handle may come off,
causing personal injury.
3
Lower the door into its final position and
insert the screws in the rails on both sides.
4
Insert the basket into the frame, and push the
drawer back until it clicks into place.

Connecting the Water Line

Before Beginning

This water line installation is not covered by the
refrigerator warranty. Follow these instructions
carefully to minimize the risk of expensive water
damage.
If necessary, call a qualified plumber to correct
water hammer before installing the water supply
line to the refrigerator. Water banging in the
pipes, or water hammer in residential plumbing
can cause damage to refrigerator parts and lead to
water leakage or flooding.
• Turn the icemaker OFF if the refrigerator will be
used before the water line is connected.
• Do not install the icemaker tubing in areas
where the ambient temperatures fall below
freezing.
WARNING
• Connect to potable water supply only.
CAUTION
• To prevent burns and product damage, only
connect the refrigerator water line to a cold
water supply.
INSTALLATION
17

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido