Aux-In Connection - auna 388 DAB+ Manual Del Usario

EN
C. Pre-set EQ function
This unit provides 4 differences sound mode to enhance your listening
experience. You can select the desired effect by pressing the "Preset EQ"
button (22) repeatedly at following sequence:-

AUX-IN CONNECTION

Connect the unit to other device by connecting the Aux in jack (5) with a
3.5mm cable(not provided) and other end connect to the external device
such as Discman/MP3 player to perform the music playback or encoding
function etc.
1. Press the Function button (10) to Phono/Aux position.
2. Adjust the Power ON-OFF/ Volume Control Knob (19) to desired volume
level.
3. Start to play your external device.
47