Technical Data; Safety Instructions - auna MD-150-BT Manual Del Usaurio

Dear Customer,
Congratulations on purchasing this eqipment. Please read this manual carefully and take care of the
following hints on installation and use to avoid technical damages. Any failure caused by ignoring
the mentioned items and cautions mentioned in the operation and installation instructions are not
covered by our warranty and any liability.
Technical Data 10
Safety Instructions 10
Product Description and Controls 12
Basic Operations 13
Installation and Dismantling 14
Connections and Wiring 15
BT Operations 16
RDS Operations 16
Troubleshooting 17
Environment Concerns 17
Declaration of Conformity 17
Item number
FM Radio
Frequency scope
Intermediate Frequency
Signal-to-noise ratio
Noise-limited sensitivity (S/N = 30 dB)
Music Player
Signal-to-noise ratio
Chanel separation at 1 KHz
Harmonic distortion at 1 KHz
Frequenzbereich
Amplifier
Output
Speaker resistance
Maximum output power
Power supply
Dimensions (Length x Height x Depth)
Installation Cautions
• The said product is powered via 12V and before installation, please check to ensure the voltage of the automo-
bile is correct;
• In the wiring process, tear down the battery's negative connecting wires so as to avoid electric shock or person-
nel injury due to short-circuit;
Contents

Technical Data

10007165
87.5~108 MHz
10.7 MHz
40 dB
≤ 37 dB
40 dB
30 dB
≤ 5%
100 Hz - 10 KHz ± 6 dB
Speaker output
4~8 Ohm
≥ 16 W x 4
DC 12 V
182 mm (L) x 52 mm (H) x 145 mm (D)

Safety Instructions

10