Kobalt KSB 5080-06 Manual Del Usuario página 12

ASSEMBLY INSTRUCTIONS
3. INSTALLING THE CHUTE-ROTATION BOX
• Align the holes in the panel of the
chute-rotation box (D) and the switch box (E).
• Put the chute-rotation box screws (CC) through
the holes.
• Tighten the chute-rotation box screw nuts (EE)
with a wrench (not included).
4. INSTALLING THE DISCHARGE CHUTE
• Align the grooves of the discharge chute (F)
with the slot on the chute housing.
• Push the discharge chute into position.
• Tighten the discharge chute screws (DD) with a
Phillips head screw driver to lock the discharge
chute.
3
D
4
F
Slot
11
CC
E
EE
DD
Groove