How To Operate The Appliance - Braun Silk-épil 7 SkinSpa Manual Del Usuario

8 Brush adapter
8a Exfoliation brush
8b Protective cover
9 Cleaning brush
Charging
• Before use, charge the appliance. For best performance, we
recommend that you always use a fully charged appliance. Using the
special cord set, connect the appliance to an electrical outlet with the
motor switched off. Charging time is approximately 1 hour.
• The charging light (5) flashes green (+) to show that the appliance is
being charged. When the battery is fully charged, the green charging
light shines permanently. Once fully charged, use the appliance without
the cord.
• A red flashing charging light (–) shows that it is time to recharge the
appliance. Reconnect it to an electrical outlet via the special cord set.
• A full charge provides up to 40 minutes of cordless operation time.
• Wet usage might reduce the operation time. We recommend that you
recharge the appliance after each use.
• The best temperature range for charging, using and storing the appliance
is between 15 °C and 35 °C. In case the temperature is far beyond this
range, charging might take longer and the cordless operation time might
be reduced.
Overheating protection
As a safety feature to avoid the unlikely event of the appliance overheating,
it may happen that the charging light (5) shines red for 8 seconds and then
the appliance turns off automatically. In this case, turn the switch back to
the position «0» (off) and let the appliance cool down.

How to operate the appliance

Pressing the lock key (4a) turn the switch (4) clockwise. You can select
speed «I» or «II».
The Smart light (3) shines as long as the appliance is switched on.
To change an attachment, press the release button (6).
13