Communicating Thermostat - 3M Filtrete -30 Guia De Funcionamiento

Communicating Thermostat

The 3M-30 has 2 RTM-1 radio ports. These allow your thermostat
to communicate with other systems. Depending on your area
power company, programs may be available to connect your
thermostat to power grid status information. This can make it easy
for you to moderate your energy use at peak hours and use power
when it is less expensive.
Using USNAP Radios
connect your 3M-30 to your home WiFi network. This can give you
access to your home's HVAC system even when you are away
[with additional web service]. It can also give you access to web
based efficient energy management sites that can help you save
money and protect the environment.You can connect your 3M-
30 to an AMI network for In Home Display of electric grid status or connect to a Home Automation
network for HA functionality with remote access to your HVAC system and home conditions.
To Insert a USNAP radio module:
Power off the 3M-30. Insert the radio module in either
slot on the back of the 3M-30. Power up 3M-30.
To connect to a network follow the instructions that
came with the USNAP module.
Customer support: filtrete@radiothermostat.com
- The USNAP ports allow you to
USNAP
radio
Caution
DO NOT INSERT or REMOVE USNAP radio
modules if power is ON. This can damage the
thermostat or radio modules.
888-607-5824 or www.radiothermostat.com/filtrete
USNAP port
15
PG