Auto-Run Program - 3M Filtrete -30 Guia De Funcionamiento

Auto-run Program

The 3M-30 comes pre-programmed with an EPA approved program. This program is recommended
by the EPA for energy efficiency. We strongly recommend that you Auto-Run this program for one
week, and see if it works for you. If it does not fit your needs you can always input a custom program.
To run the EPA program, set the mode switch to HEAT or COOL.
Press the MENU button and use the arrows by the time display to set the time.
Touch the DAY area and advance it to select the present day.
Touch HOME. The unit is now running the
EPA
MORN DAY EVEN
HEAT
6:00am 8:00am 6:00pm
All Days 70 F 62 F 70
o o o
TO CHANGE THE PROGRAM:
Make sure the 3M-30 mode switch is set to either HEAT or COOL, then press the PROGRAM button.
This puts you at the PROGRAM screen [see page 4]. The programmed start time is diplayed in the
upper left. The TIME SLOT icon indicates the active TIME SLOT in the default program [MORN, DAY,
EVEN, NITE]. The programmed Target Temperature is shown on main display.
The HEAT program and the COOL programs are separate.
program.t
NITE MORN DAY
COOL
10:00pm 6:00am 8:00am
All Days 78 F 85 F
o o
62 F
o
EVEN NITE
6:00pm 10:00pm
78 F 82 F
o o
7
PG