Advanced Functions; Access To Configuration Menu; Configuration Menu Parameters - Tractel Group dynafor LLX1 Serie Instrucciones De Utilización Y De Mantenimiento

8.3.

ADVANCED FUNCTIONS

The configuration menu is used to optimise the LLX1 parameter settings in accordance with the
conditions specific to certain applications.

8.3.1. Access to configuration menu

8.3.2. Configuration menu parameters

DESCRIPTION
Read frequency
Automatic stop
Remote control
T1
kg
Configuration T1 to go from C1 to C2 etc.
menu T2 and T3 to display options, ex: C1-1 / C1-2 / etc.
-1: kg (kilogram) / -2: t (ton) / -3: ton (short ton)
Units
-4: lbs (pounds) / -5: daN (decaNewton) -6: kN (kiloNewton)
-0: 4 x / sec. -1: 2 x / sec. -2: 1 x / sec.
-3: every 2 sec. -4: every 4 sec. -5: every 8 sec.
-0: No / -1: Yes > 10 minutes / -2 > 20 min / -3 > 30 min.
-4 > 40 min / -5 > 50 min / -6 > 60 min.
Connection -0: Not used in this version
Address -0: Not used in this version
-0: Not used in this version
channel
Back Light -0: Not used in this version
Store Store new parameters in memory
T2 T3
T
REMARKS
11
GB