Installation, Utilization And Uninstallation; Installation; Utilization; Uninstallation - Tractel Group dynafor LLX1 Serie Instrucciones De Utilización Y De Mantenimiento

6.

INSTALLATION, UTILIZATION AND UNINSTALLATION

DANGER
6.1.

INSTALLATION

When installing you must:
a) make sure that the load line anchoring point(s) are sufficiently robust in relation to the
traction that will be applied.
b) make sure that the anchoring accessories at either end of the dynamometer are compatible,
and that they comply with the relevant regulations.
GB
c) make sure that clevis pins are well locked, with the nut screwed down to the maximum, and
make sure that the hook safety latch is working correctly.
d) make sure that the sensor is correctly aligned in the traction line.
DANGER
6.2.

UTILIZATION

Only use dynafor™ LLX1 in traction, avoiding compression, twisting or flexing.
The appliance can be used in all directions, including horizontally.
The dynafor™ LLX1 operates correctly in a temperature range of de –20° C to + 40° C. For use outside
of this range, the appliance will require heat protection.
6.3.

UNINSTALLATION

When uninstalling the appliance, first make sure that it is no longer subject to any traction stress.
6.4.

UTILIZATION PROHIBITIONS

IT IS PROHIBITED:
• To use dynafor™ LLX1 in a line for lifting people without having carried out a prior
specific risk analysis.
• To modify the appliance housing by machining, drilling or any other process.
• To use dynafor™ beyond their maximum capacity.
• To put the Dynafor in a arc weld electrical circuit.
• To disassemble or open the sensor.
• To use the appliance for operations other than those described in this manual.
: The product must be installed by a qualified technician.
: The user must make sure that the operator is perfectly familiar with the
information contained in the user and maintenance manual before using the unit.
®
®
®
kN daN lbs ton kg kN daN lbs ton kg
STOP MAX + – TARE STOP MAX TARE
+ –
8
®
kN daN lbs ton kg
STOP MAX TARE
+ –