HoMedics BKP-300 Manual De Instrucciones E Información De Garantía página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Power Button
To turn on the massage
functions, press the
POWER button. The
L.E.D. indicator above it
Targeted
will illuminate and
Massage Zones
confirm your selection.
Zone buttons activate
To turn the massage
functions off, simply
motors to massage
press the button again
specific areas:
shoulders, upper back,
and the L.E.D. indicator
middle back, lower
will turn off.
back, and thighs.
Customize your
massage by choosing
Power Adapters
one specific area, any
combination of areas or
This product is powered
all five at once. To
by a custom 120 volt
select a massage area,
AC home adaptor, and
simply push the button
12 volt DC auto adaptor
and the corresponding
(cigarette lighter plug-in
L.E.D. light will
style). Both are included
illuminate. To deselect,
with your unit.
simply push the button
again and the
corresponding L.E.D.
lights will turn off.
NOTE: When selecting the heat feature
with massaging action, there will be a
slight decrease in the strength of the
massage output. This adjustment is
perfectly normal and should not be
interpreted as a defect.
6
Heat
Soothing, penetrating heat is activated by
pushing the heat button. To turn heat off,
simply push the button again. A glowing
L.E.D. light indicates that heat is on.
NOTE: The heat function is pressure
activated. The heat action will not function
unless pressure is applied to the seat of
the cushion. Once pressure is removed, the
heat will stop. For safety purposes heat will
only function when massage is activated.
Massage Speed
Choose the speed at which your custom
programmed massage travels in the Pulse,
Side to Side and Mix programs. There are 3
options: low (L), medium (M) and high (H)
and corresponding L.E.D. lights will indicate
your selection. The default setting is medium.
To change the speed of your massage simply
press the button.
Massage Strength
Choose the intensity of your massage with
three options of massage strengths: low (L),
medium (M), and high (H). L.E.D. lights
correspond to your selection. The default
setting is medium. To change the strength of
your massage, simply press the button again.
Massage Functions
This product incorporates 4 pre-programmed
massage functions that can be easily selected
by pressing the corresponding button. Once
activated, you can move from one function to
another by simply pressing another function key.
All Motor Massage
Activates all 10 motors for a total massage
experience. This is the default setting when
the unit is powered on.
Pulse Massage
Repeating pulses of massage relief
Side-to-Side Massage
From your left side to your right, back and forth
Mix Massage
An invigorating mix of the other programs
10 Massage Motors
Heat
Pressure
Activated
Switch
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bkp-300-2

Tabla de contenido