Samoa 366 000 Guía De Servicio Técnico Y Recambio

WARNINGS
T
his uniT is inTended for professional use
r
ead all The insTrucTions in This manual prior To use
• The 366000 meter is an oval gear model.
• Only use the unit for the purposes for which it is
intended.
• This unit has not been approved for use in commer-
cial transactions.
• Do not alter or modify the unit.
• Do not exceed the maximum unit working pressure.
See page 7, technical specifications.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
ELECTRONIC METER
Parts and technical service guide
Introduction
.
• Use the unit with fluids and solutions which are com-
patible with the moist parts of the unit. See the rele-
.
vant section of the technical specifications.
• Observe the manufacturer's safety warnings for the
fluids used.
• The meter has been manufactured with low toleran-
ces in order to ensure high precision over a wide
range of flows and viscosity.
• Check measurement units counter before first use.
• In order to save energy the meter switches off auto-
matically after 30 seconds of inactivity. All the data are
stored for recovery once the meter has been restarted.
Part No.:
366 000
R. 09/14 836 826
1