Overview; General Description - Aqua Power AQM 2-1 Manual De Instalación Y Funcionamiento

Ocultar thumbs Ver también para AQM 2-1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TECHNICAL DRAWINGS
This manual must be read carefully before attempting to
!
install the aqm water heater. If you do not follow the safety
rules or the instructions outlined in this manual, the unit
may not operate properly and it could cause property dam-
age, serious bodily injury and/or death.
Aqua Power®, Inc. will not be liable for any damages be-
!
cause of failure to comply with the installation and operat-
ing instructions outlined in this manual or because of im-
proper use. Improper use includes the use of this appliance
to heat any liquid other than water. Failure to comply with
the installation and operating instructions or improper use
voids warranty. Never remove the unit's cover unless the
electricity is turned off.
If you have any questions regarding the installation or op-
!
eration of this water heater, or if you need any additional
installation manuals, please call our technical service
800.582.2213
line on
calling from outside the U.S. or Canada, please call USA
413.247.3380
and we will refer you to a qualified Aqua
Power® service representative in your area.
10
| AQM ELECTRIC TANKLESS WATER HEATERS
(USA and Canada only). If you are
6.

Overview

6.1

General Description

The AQM tankless water heater differs from conventional
storage type water heaters in several ways. It does not store
hot water. Instead, water is heated instantaneously as it flows
through the unit. The powerful heating elements are activated
by a flow switch as water is drawn from a hot water faucet
connected to the AQM. Due to the absence of stand-by losses,
the AQM offers greater energy efficiency than storage type
water heaters. The unit will continuously supply hot water as
long as the faucet is open.
The temperature of the hot water delivered by the AQM
depends on the wattage of the heating element, the
temperature of the incoming cold water, and the water flow
rate through the unit. In order for the AQM to operate properly,
it must be carefully matched to the application.
In case you have questions regarding the way you plan to use
the AQM, please call our technical service line at 800.582.2213
(USA and Canada). For service outside the U.S. and Canada,
please call us at 413.247.3380. You can also e-mail us at
info@aptankless.com or fax us at 413.247.3369.
WWW.APTANKLESS.COM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aqm 2.5-1Aqm 3-1Aqm 3.5-1Aqm 4-2Aqm 6-2

Tabla de contenido