Important Information Before Supplying Power To Unit - Aqua Power AQM 2-1 Manual De Instalación Y Funcionamiento

OVERVIEW
The AQM can be used for hand washing type applications in
the U.S. and Canada:
– Restroom sinks in commercial/industrial facilities and homes
– Kitchen areas in commercial /industrial facilities and homes
– Cabins
– Special uses in photo developing shops, laboratories etc.
The AQM can also be used for whole apartments and homes
in warm climate zones such as the Caribbean region, Central
America and Mexico due to the higher ambient water
temperatures.
6.2 Important information before supplying
power to unit
Air in the cold water pipe will destroy the bare-wire heat-
ing system of the AQM. If the water supply to the AQM has
been interrupted, for example due to the risk of frost or
work on the water pipe, the following steps must be carried
out before the unit is used again.
WWW.APTANKLESS.COM
1 Turn off circuit breaker.
2 Open a hot water tap downstream of the unit for as long
as is necessary for the unit and the cold water pipe to be
free of air.
3 Turn on circuit breaker.
All information in these Instructions for Use and
Installation must be followed carefully. They provide
important information with regard to safety, operation,
installation, and maintenance of the device.
AQM ELECTRIC TANKLESS WATER HEATERS | 11