Description And Functions Of The Appliance - Tesmed TE 780 PLUS Manual De Instrucciones

Description of the appliance
REFERENCE
ARROWS
PROGRAMS
AND INTENSITY
LEVELS
KEY 1
KEY 2
Functions of the appliance
SWITCH ON: PRESS KEY 3.
SWITCH OFF: KEEP KEY 2 RESSED FOR ABOUT 3 SECONDS. THE APPLIANCE
WILL TURN OFF REGARDLESS OF THE CURRENT ST ATUS. ON PRESSING KEY 2
THE TESMED IS IMMEDIATELY SWITCHED OFF IF THE INTENSITY = 0
(WITHOUT HAVING TO WAIT 3 SECONDS).
CHANNEL SELECTION: PRESS KEY 4 TO SELECT A SINGLE CHANNEL OR BOTH
CHANNELS A-B.
PROGRAM SELECTION: PRESS KEY 1 TO SELECT FIRSTL Y THE INDIVIDUAL
TYPES OF MASSAGE (TAPPING (I), TAPPING (II), KNEADING, PRESS OR VIBRA-
TION) (AT LEAST ONE OF THE FLASHING ARROWS WILL GO NEXT TO THE TYPE
OF MASSAGE DESIRED), FOLLOWED BY PROGRAMMES 1/45, HESE WILL
START TO FLASH WHEN ONE OF THE TWO ARROWS IS POINTING TO PRO-
GRAM. KEEP KEY 1, PRESSED TO SPEED UP THE PROGRAM SELECTION;
WHEN YOU GET CLOSE TO THE PROGRAM YOU W ANT, WE RECOMMEND T AP-
PING ON KEY 1 TO ADVANCE ONE PROGRAM AT A TIME. PRESS KEY 3 TO CON-
FIRM THE PROGRAM, AS INDICATED IN "INCREASE INTENSITY" BELOW.
INCREASE INTENSITY: WHEN THE NUMBER OF THE PROGRAM YOU W ANT TO
USE STARTS FLASHING, PRESS KEY 3 TO CONFIRM THE PROGRAM AND THE
APPLIANCE WILL AUTOMATICALLY START WORKING AT THE LOWEST INTENSI-
TY LEVEL OF 0.5 (NUMBER 1 FLASHES). EVER Y TIME YOU PRESS KEY 3 THE
INTENSITY INCREASES BY 0,5 (ONE STEP A T A TIME, MAX 18 STEPS). PRESS
KEY 2. TO LOWER THE INTENSITY. WHEN YOU PRESS KEY 2 WHEN THE INTEN-
SITY = 0, THE APPLIANCE WILL SWITCH OFF . THE INTENSITY V ARIES BY
ITSELF DURING THE 45 PRE-SELECTED PROGRAMMES EVER Y TIME THE TYPE
OF MASSAGE IS CHANGED. YOU CAN, IN ANY CASE, CHANGE THE INTENSITY ,
BUT THE APPLICATION TIME OF 20 MINUTES CANNOT BE MODIFIED.
B A
Mode OFF
18
B - A
Tapping (I)
Tapping (II)
Kneading
Press
Vibration
Program
Intensity
ON B-A
KEY 3
CHANNELS
MASSAGE
TYPES
PROGRAMS
KEY 4