Connecting The Electricity; Basic Functions; Switching The Device On; Switching The Device Off - Sonoro elements Manual De Instrucciones

C
ONNECTING THE ELECTRICITY
First please plug the provided power adapter into the electrical outlet and then
plug the adaptor plug into the „
Only use the provided power adapter (model number VA24B-120200) and pay attention to the
>
safety information on page 4 and 5.
7. B
S
WITCHING THE DEVICE ON
Touch the
is equipped with a touch sensor here, so that a light touch is sufficient.
After it is switched on, the most recently used music mode (FM RAD I O, AM RA -
D I O, AUX) is activated, the music slowly fades in and the key illumination begins
to light up.
> You can deactivate the illumination of the key area in the settings of your
more information about this, read p. 16. In addition, your
tically. You can read about using the alarm function on page 14.
S
WITCHING THE DEVICE OFF
Touch and hold the
to switch off your device. GOOD BY E will appear on the display, followed by the
time, and the illumination of the key area is slowly turned off.
Your
>
elements
using the automatic shutoff function on page 15.
V
OLUME
When the device is switched on, you can increase the volume of your elements
with the button +
inform you about the selected volume. You can set the volume from VOL M I N
(mute) to VOL MAX in 32 steps.
10
ASIC FUNCTIONS
lettering
can also switch off automatically after a certain time. You can read about
④
and reduce it with the button –
" connection
①
on the front of the device. Your
elements
①
lettering on the front for about two seconds
⑮
of your
elements
elements
elements
can also switch on automa-
⑤
The display
.
. For
②
will