Automatic Shutoff; Equalizer (Bass/Treble) - Sonoro elements Manual De Instrucciones

If you want to temporarily suppress an activated alarm rather than turning it off,
⑥
you can use the snooze function. Briefly press the button once when the
alarm is activated. Now SNOOZE will appear on the display and you can use the
+ and – buttons to set after how many minutes the alarm should be switched on
again. The default setting is 10 minutes. Once you have made a selection, please
confirm it with the button. The small alarm symbol on the display will conti-
nue to flash and after the time set by you, the alarm will be activated again. If you
would like to break off the snooze function ahead of time, press the menu button
for approx. two seconds until the device switches off automatically.
A
UTOMATIC SHUTOFF
If you would like to fall asleep to the music of your , the device can
elements
switch off after a certain time. (sleep timer function)
⑥
If you would like to activate this function, please press the button , se-
lect the menu item S L E E P with the buttons << and >> and confirm it again with
the button. The symbol will appear on the display. (Sleep Timer)
If the automatic shutoff has already been set, the remaining time will be display-
ed. You can set the shutoff time in minute increments with the buttons << and
>>. With the buttons + and – you can set the shutoff time in 5 or 15 minute in-
crements. Confirm your selection with the button.
You have 1 M I N to 9 0 M I N available. If you select O F F, the automatic shutoff
will be deactivated. Shortly before your is switched off, messages
elements
about the remaining time will be displayed. One minute before the shutoff, your
will begin to slowly fade out the playback.
elements
E (B /T )
QUALIZER ASS REBLE
You can adjust the sound of your elements to your personal taste or your spatial
conditions. You can adjust the bass and treble in 7 steps each.
⑥
Press the button on your switched-on and then select the
elements
menu item BASS or TRE B L E with the buttons << and >>. Please confirm your
selection with the button.
Corresponding to the selected menu item, you now have the possibility of chan-
ging the bass or treble setting of your .
elements
You can select a value between - 3 and + 3 with the buttons + and –. A positive
value means that depending on the selection of BASS or TRE B L E, low or high fre-
quencies are increased. A negative value indicates a reduction of the correspon-
ding frequencies.
15