11. C
ONNECTIONS
H
EADPHONES
You can connect headphones to the headphone connection
plug. Make sure that you don't confuse the headphone connection
Aux-In connection
>
Avoid listening with headphones at a continuous high volume. There is the danger of permanent
hearing damage! Make especially sure that children don't turn the volume too high.
A
-I
UX
N
With the Aux-In connection, you can connect an external device and enjoy music
from this device (such as e.g. an MP3 player) with the excellent sound of your
.
elements
To do this, plug your external device into the 3.5 mm jack socket
necting cable. For more information about the Aux operation, please read page
13. Make sure that you don't confuse the Aux-In connection
⑫
phone output
.
Based on the many different connection possibilities, it may be possible that the provided Aux
>
cable doesn't fit all devices. The device that you use has to transmit the audio data through a 3.5 mm
jack socket. The headphone output of an MP3 player or line output of a computer are suitable for a
connection with your elements, for example. Also pay attention to the specifications in the chapter
T
D
on page 19.
ECHNCAL
ATA
A
NTENNAS
Your
elements
installed antenna can suffice for the reception of FM stations with good reception
conditions. If you would like to use the installed antenna, please set the antenna
⑨
selection switch
If you would like to improve the reception, either connect the provided cable an-
tenna to the „
house antenna through the same connection
If you have a cable connection, you can connect the antenna connection
>
with a customary coaxial cable to your antenna outlet and receive radio through cable in this way. This
coaxial cable is not included in the scope of delivery.
⑪
.
can receive stations in the FM and AM frequency range. The
to „INT".
connection
⑧
or connect your
⑧
.
⑫
with a 3.5 jack
⑫
with the
⑪
with the con-
⑪
with the head-
with your
elements
⑨
of your
elements
17