Description Of Functions; Comfort Mode; Programming Mode - Fondital eCool ED Manual De Instalación, Uso Y Mantenimiento

4.2.1. DESCRIPTION OF FUNCTIONS

Comfort Mode:

It is the standard mode of use of the radiator to keep the ambient temperature to the value set.
1. Press the function key until the relevant key is displayed.
2. Select the desired temperature using + and - keys
Note: Comfort temperature will always be 0.5°C higher than night temperature. It is not possible to set
the Comfort temperature equal to or lower than the night temperature.
Eco (night) mode:
By selecting this operating mode, the appliance keeps the ambient to the night temperature set. The
desired night temperature setting takes place as follows:
1. Press the function key until the relevant key is displayed.
2. Select the night temperature using + and - keys.
Note: night temperature will always be 0.5°C lower than comfort temperature. It is not possible to set
the night temperature equal to or higher than the comfort temperature.
Boost Mode:
The radiator works at full power for 2 hours, regardless of the ambient temperature. At the end of the
two hours, the radiator switches back to the previously selected operating mode. This mode is useful
for quickly heating the rooms.
To set this mode, press the function key until the relevant "2h" icon is displayed.

Programming mode:

In this mode the radiator works by automatically switching to Comfort or night mode following the
daily/weekly settings programmed by the user.
To set this mode, press the function key until the relevant icon is displayed.
For the weekly programming refer to the suitable section of the manual.
Freeze protection mode:
By selecting this mode, the ambient temperature is set to 7°C.
Press the function key until the relevant key is displayed.
Stand-by mode:
Press C key to switch on the appliance or to activate the "Standby" mode.
In "Stand-by" mode the radiator is switched off, waiting for other commands.
NOTE: When appliance is in "Standby" mode, system will sound 2 acoustic signals for 0.5 seconds.
When the appliance is switched on, system will sound one acoustic signal for one second.
When the appliance is in standby, it will display "Stb", the current time and day of the week.
Warning: in this position the radiator is still powered.
38
EN