Environment; Characteristics Of The Appliance - Fondital eCool ED Manual De Instalación, Uso Y Mantenimiento

8. ROOM
protection and improvement policy of environmental quality and avoids potential harmful effects
on human health due to the presence of harmful substances, according to the classification of the
applicable European directives.
Warning! Incorrect disposal of the appliance involves sanctions.

9. CHARACTERISTICS OF THE APPLIANCE

IP44: appliance protected against jets of water
Class II: double insulation
The radiator consists of a body in aluminium alloy and contains a fluid for internal heat transmission,
composed of a mix of water and anti-freeze, specific for aluminium radiators.
The internal fluid is heated through a resistor with class II insulation, a self-adjusting PTC resistor.
Note: during cold starting the power absorbed by the resistor during the first 2-3 seconds of
operation is 50% higher than the typical power value.
Control and adjustment electronics ensures the ambient temperature setting.
Colour of the radiator: RAL 9010.
Input voltage
Steady resistor power
Insulation class
Water protection class
Working temperature
Storage temperature
Working relative humidity
Temperature setting
Temperature range
42
The symbol applied to the appliance and shown here indicates that the product
must be disposed of in separate collection for electrical equipment.
At the end of the life of the appliance, it cannot be eliminated as solid urban
waste, but it must be sent to the collection centre of your area or returned to the
dealer when buying a new appliance of the same type and destined to the same
purpose.
Electrical and electronic equipment separate collection forms a part of a safeguard,
230V AC 50 Hz
Mod. eCool ED 300 W
Mod. eCool ED 500 W
Mod. eCool ED 700 W
Mod. eCool ED 1000 W
Class II
IP44
-5 ÷ 50 °C
-9 ÷ 70 °C
0 ÷ 85 % non-condensing
Analogue setting with knob
7°C ÷ 32°C
EN
300 W
500 W
700 W
1000 W