Technical Data; Noise Information; Vibration Information - Worx WX279.9 Manual Del Usuario

1. FORWARD/REVERSE ROTATION SWITCH
2. BATTERY PACK *
3. HOOK
4. BATTERY PACK RELEASE BUTTON *
5. ON/OFF SWITCH
6. LED LIGHT
7. COLLET LOCKING SLEEVE
8. SQUARE DRIVER
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WX279.9 (279 - designation of
machinery, representative of Impact Wrench)
Voltage
No-load speed
Impact rate
Max torque
Chuck size
Machine weight
6
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Typical
Vibration emission value a
weighted
Uncertainty K = 1.5m/s²
vibration
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
Lithium-Ion Brushless impact wrench EN
20V Max**
0-1300/2100/2900/min
0-1600/2900/3300bpm
100/180/300N.m
1/2"(13mm)
1.7kg
L : 78.1dB(A)
pA
L : 89.1dB(A)
wA
3.0dB(A)
= 9,457m/s
2
h
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10°C or less
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
Hook
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
1