Top View - Friedrich SS08 Manual De Instalación Y Funcionamiento

Figure 38
CABINET
SILL PLATE
TURN SILL PLATE
END TO END
Figure 39
A
MAXIMUM WALL THICKNESS
MODEL
SMALL CHASSIS
MEDIUM CHASSIS
LARGE CHASSIS
BEFORE
SCREW
(4 REQUIRED)
NOTE: HOLES IN SILL
PLATE MOVED TO
BACK SIDE
DETAIL A
NUT
(4 REQUIRED)
DETAIL B
BEND TABS DOWN
CONDENSER AIR
INTAKE LOUVERS
TOP VIEW SHOWING
BEVELED SIDES FOR
AIR INTAKE.
WALL BELOW UNIT MUST
BE BEVELED ALSO.
A
7-3/8"
7-3/8"
15-1/8"
CABINET
NOTE: SCREW AND NUT
ORIENTATION NOW REVERSED.

TOP VIEW

CONDENSER AIR
OUTLET / REJECTED
HEATED AIR
NOTE: CONDENSER AIR INLETS AND OUTLETS
MUST BE UNOBSTRUCTED TO AVOID THE
RECIRCULATION OF REJECTED HEATED AIR.
AFTER
NUT
(4 REQUIRED)
DETAIL C
SCREW
(4 REQUIRED)
FRR026
CONDITIONED
ROOM SIDE AIR
2" MINIMUM
BOTH SIDES
CONDENSER AIR
INTAKE LOUVERS
FRR027
33