Philips Philishave QC5090 Manual Del Usuario página 9

Tips
- We advise you to start clipping at the highest setting of the large
comb and to reduce the hair length in small steps until you reach
the desired hair length.
- If a lot of hair has accumulated in the comb, remove the comb
attachment and blow and/or shake the hair from the comb.
Removing the comb does not change the selected hair length
setting.
- Write down the hair length settings used to create a certain
hairstyle as a reminder for future clipping sessions.
Clipping without comb attachment:
You can use the clipper without comb attachment to contour the
neckline and the area around the ears. You can also find instructions
and tips on quick-start CD-ROM.
Remove the comb attachment by pulling it off the appliance
(fig. 9).
Never pull at the flexible top of the comb attachment. Always pull at
the bottom part.
The comb attachment keeps the cutting unit at a certain distance
from your head. This means that, if you use the clipper without
the comb attachment, your hair will be cut off very close to the
skin.
For precise contouring and defining:
1 Push the middle part of the cutting unit upwards with your
thumb until it opens and then pull it off the appliance (fig. 10).
Be careful that the cutting unit does not fall to the floor.
2 Place the lug of the precision trimmer into the slot and push the
unit back onto the appliance ('click') (fig. 11).
ENGLISH
9