Device Overview; Technical Data; Commissioning; Device Set-Up - Alpha IP HAP 21001 Serie Manual De Instrucciones

IP app is available in the Google Play Store (for Android smart
phones) and in the App Store (for iPhones).

4 Device overview

(see 1 page 3)
(A) System key and LED
(B) QR code and device number (SGTIN)
(C) Screw holes
(D) Mains connection
(E) Connection of plug-in power supply
(F) Network cable (scope of delivery)
(G) Plug-in power supply (scope of delivery)

4.1 Technical data

Short designation of the device
Supply voltage
Power supply unit, primary
side (input)
Power supply unit, secondary
side (output)
Power consumption of plug-in
power supply unit
Power consumption
Standby power consumption
Protection type
HAP 21001-xx
100 V-240 V/50 Hz
5 V DC
max. 1.5 W
max. 500 mA
1.1 W
IP 20
Ambient temperature
Dimensions (W x H x D)
Weight
Radio frequency
Receiver category
Typical radio range
Duty cycle
Network
Guidelines

5 Commissioning

The commissioning of the Alpha IP system is described step by
step in this section. Further Alpha IP devices can be added and
integrated into the Alpha IP System after the commissioning of
the Access Point.
Ö The Alpha IP App is available for iOS and Android for a free
download in the respective app store.
Ö An Internet connection is necessary for commissioning ans
operation.

5.1 Device set-up

1. Download the Alpha IP app and install it on your smart phone.
2. Open the Alpha IP app on your smart phone. The installation
Commissioning
5 to 35 °C
118 x 104 x 26 mm
153 g
868.3 MHz/869.525 MHz
SRD category 2
400 m (in open air)
< 1 % per h/< 10 % per h
10/100 Mbit/s, Auto-MDIX
2014/53/EU Radio installa-
tions
15