Mounting The Indoor Unit; To Install The Indoor Unit - Rotex RHBH04CA3V Manual De Instalación

3.2

Mounting the indoor unit

3.2.1 To install the indoor unit

CAUTION
Do NOT grasp the piping to lift the indoor unit.
1 Lift the unit from the package. Only for RHBH/X16: remove the
screws and sound plate at the bottom of the package.
1
60kg
2 Remove the 4 screws from the bottom of the unit. Unhook and
remove the side plates.
3
3 Put the installation pattern (see packing) on the wall and follow
the steps as shown below.
1 2
RHBH/X04+08+16CA
Rotex HPSU low temperature Bi-Bloc
4P330419-1A – 2012.11
2
3
1
4x
2x
3 4
4 Lift the unit.
1
5 Tilt the top of the unit against the wall at the position of the
2 inserted screws.
6 Hook the unit against the wall.
1 2
7 Assemble the unit.
1
1
2
2
2
3 Installation
2x
2x
3
2
Installation manual
3