Chapter 2: Setting Up And Mounting The Camera; Setup Wizard - Linksys WVC54GCA Guia Del Usuario

Chapter2
Chapter :
Setting Up and Mounting
the Camera

Setup Wizard

The Wireless-G Internet Home Monitoring Camera Setup
Wizard will guide you through the installation and
configuration procedure .
1 . Insert the Setup CD-ROM into your CD-ROM drive .
The Setup Wizard should run automatically, and the
Welcome screen should appear . If not, click Start,
then select Run, and then in the field provided, enter
D:\SetupWizard.exe (if "D" is the letter of your CD-
ROM drive) .
Setup Wizard - Welcome Screen
Click Next, then click Click Here to Start to continue .
2 . The Setup Wizard displays the following options .
Setup Camera
• Click this to begin the installation
process .
Install Camera Utility Click this to install the Camera
•
Utility on your PC .
• User Guide Click this to open the PDF file of this User
Guide .
Exit
• Click this to exit the Setup Wizard .
To install the Camera, click Setup Camera .
3 . On the End User License Agreement screen, check the
box next to I accept the agreement and click Next
if you agree and want to continue the installation, or
click Exit to end the installation .
Wireless-G Internet Home Monitoring Camera
Setting Up and Mounting the Camera
End User License Agreement
4 . Connect the included network cable to your network
router or switch . Click Next .
Connect Network Cable to the Switch or Router
5 . Connect the other end of the network cable to the
Camera's Ethernet port . Click Next .
Connect Network Cable to the Camera