Linksys WVC54GCA Guia Del Usuario página 21

Chapter3
Basic Video Controls
This section of the Playback window lets you perform basic
functions on the video(s) you have selected for playback .
The controls and their functions are described below .
Basic Video Controls
Control Function
Play Click this button to play the video .
Pause Click this button to pause the
video .
Frame by Frame
to play exactly one video frame . Each
successive click advances playback
exactly one frame .
Stop
Click this button to stop video
playback .
Snapshot
still image of the current video display .
Zoom In Click this button to zoom in
on the video display .
Zoom Out
out of the video display .
Print Click this button to print the
current video image .
Playback Speed
the playback speed . Slide it to the left
for slower playback or to the right for
faster playback .
Sound Click this button to turn the
sound on or off .
Volume
Slide this bar to adjust the
sound volume . Slide it to the left to
lower the volume or to the right to raise
the volume .
Wireless-G Internet Home Monitoring Camera
Click this button
Click this button to capture a
Click this button to zoom
Slide this bar to adjust
Installing and Using the Camera Utility
Hard Disk Quota
This section of the Playback window indicates how much
hard disk is allocated for recorded video .
Hard Disk Quota
Advanced Video Controls
Advanced video functions are performed using the
advanced video controls . These controls are located
below the viewing area and consist of two buttons and
three markers . Each marker displays the date and time of
a specific point in the video . If you reposition a marker, the
displayed date and time will change accordingly .
Video Controls
Convert to AVI
To convert the currently playing video to
AVI format, click this button, select a destination folder for
the AVI file, and then click OK .
Delete Video Click this button to delete the video from
your computer .
<mm/dd/yyyy hh:mm:ss>
and time of the current point in the video . As playback
proceeds, this marker moves to the right . To immediately
move to another point in the video, slide this marker to
the desired point .
S <mm/dd/yyyy hh:mm:ss>
the starting point for playback . By default this marker is
always set to the start of the video . If you want to start
playback at a later point in the video, move this marker to
the right .
E <mm/dd/yyyy hh:mm:ss>
the ending point for playback . By default this marker is
always set to the end of the video . If you want to stop
playback at an earlier point in the video, move this marker
to the left .
Other Buttons
Click Monitor to open the Monitor window . Click Help to
display help information .
This marker displays the date
This marker is used to select
This marker is used to select
1