Lutron DALI LOR-WPM-6D Guía De Instalación Y Funcionamiento página 11

Return the Wallbox Power Module with DALI Control Unit to Factory Settings:
Note: Returning a WPM to its factory
settings will remove it from the system
and erase all programming from it.
Step 1 : Triple tap the Default Scene
Button. DO NOT release after the
third tap.
Step 2 : Keep the Default Scene Button
pressed on the third tap (for
approximately 3 seconds) until
the LED flashes slowly.
Step 3 : Release the Default Scene
Button and immediately triple tap
it again. The LED on the Default
Scene Button will flash quickly.
The WPM has now been returned
to factory settings and needs to be
reprogrammed into a system.
®
Wallbox Power Module Installation and Operation Guide 11