Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10.ATTACHFRONT LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly through front hole in tractor
front suspensionbracket (F)and secure
with retainer spring (G) through hole in
link located behind the bracket.
11.Insert other end of link (E) into hole in
front mowerbracket (H) and securewith
washer and retainer spring (J).
12. Disengage belt tension rod (K) from
locking bracket (L).
13. Installbelt onto engineclutch pulley (M).
IMPORTANT: Checkbeltfor properrouting
in all mower pulley grooves.
14. Engage
belt tension
rod (K) on locking
bracket
(L).
OAUTION:
Belt tension
rod is spring
loaded.
Have a tight grip on rod and engage
slowly.
15. Raise
attachment
lift lever
to
highest
position.
16. If necessary,
adjust gauge wheels
before
operating
mower
as shown
in the Opera-
tion section
of this manual.
23
Publicidad
Tabla de contenido
