Mounting Diagram - Chauvet DJ Intimidator Spot Duo 150 Guía De Referencia Rápida

Intimidator™ Spot Duo 150 QRG
AC Power
Power Linking
Fuse
Replacement
Mounting
Mounting
Diagram
Control Panel
Description
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
For the maximum number of Intimidator™ Spot Duo 150 that can be
power linked at 120 V or at 240 V, see the User Manual or the label on the
product.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver, loosen the fuse holder and pull
straight out.
3. Remove the blown fuse from the safety cap and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder.
5. Reconnect the product to power.
Before mounting this product, read the
Tripod Insertion
Button
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Safety Notes.
Hanging Bracket
Rubber Feet
Function
4
EN