Lenco L-90 Manual Del Usuario página 13

Redo (repeat last command).
Zoom In
Zoom Out
Fit selection in window: zooms until the selection just fits inside the window.
Fit project in window: zooms until all of the audio just fits inside the window.
The "Track Pop-Down" Menu
If you click on the title of a music track, the "track" pop-down menu appears. This lets
you access a few special commands that apply to individual tracks.
Name: here you can change the name of the track.
Move Track Up: exchanges places with the track above.
Move Track Down: exchanges places with the track below.
Waveform: sets the display to "waveform". This is the default method to visualize the
audio.
Waveform (dB): this is similar to Waveform, but measured in decibels (dB), on a
logarithmic scale.
Spectrum: displays the track as a spectrogram, showing the amount of energy in
different frequency bands.
Pitch (EAC): highlights the outline of the fundamental frequency (musical pitch) of
the audio, using the Enhanced Autocorrelation (EAC) algorithm.
Mono: the sound comes from just one speaker, either the right, or the left.
Left Channel: plays the track only thru the left speaker.
Right Channel: plays the track only thru the right speaker.
Make Stereo Track: if there is another track below the one playing, this feature joins
them into a single stereo track. The top track represents the left speaker, while the
13