Celestron 44108 Manual De Instrucciones página 2

Care and Maintenance ..................................................................................
Professional Model # 44108 ............................................................................
Professional Model # 44110 ............................................................................
Warranty ...................................................................................................
Congratulations on your purchase of a Celestron microscope. Your microscope is a precision optical instrument, made of
the highest quality materials to ensure durability and long life. It is designed to give you a lifetime of pleasure with a
minimal amount of maintenance.
This instruction manual covers two different microscope models. Please be sure to locate your specific model of
microscope in order to ensure you read the correct information.
Before attempting to use your microscope, please read through the instructions to familiarize yourself with the functions
and operations to maximize your enjoyment and usage. See the microscope diagrams to locate the parts discussed in this
manual.
The microscopes described in this manual provide high powers from 40x up to 1500x. These microscopes types are ideally
suited for examining specimen slides of yeasts and molds, cultures, plant and animal parts, fibers, bacteria, etc.
Your Celestron microscope is a precision optical instrument and should be treated with care at all times. Follow these care
and maintenance suggestions and your microscope will need very little maintenance throughout its lifetime.
•
When you are done using your microscope, remove any specimens left on the stage.
•
Turn off any electric illuminators.
•
Unplug any power cords being used.
•
Always place the dust cover over the microscope when not in use or when being stored.
•
Store the microscope in a dry and clean place.
•
Be very careful if using your microscope in direct sun light to prevent damage to the microscope or your eyes.
•
When moving your telescope, carry it by the "arm" with one hand and not by the focuser knobs, eyepiece housing,
etc. Then, put your other hand under the base for support.
•
Clean the outside surfaces (metal and plastics) with a moist cloth.
•
Always unplug any cords before cleaning.
•
Never clean optical surfaces with cloth or paper towels as they can scratch optical surfaces easily.
•
Blow off dust with a camels hair brush or an air blower from optical surfaces.
•
To clean fingerprints off of optical surfaces, use a lens cleaning agent and lens tissue available at most photo
outlets and when cleaning do not rub in circles as this may cause sleeks or scratches to occur.
•
Never disassemble or clean internal optical surfaces. This should be done by qualified technicians at the factory or
other authorized repair facilities.
•
When handling glass specimen slides, be careful as the edges can be sharp.
Table of Contents
Introduction
Care and Maintenance
2
2
3
9
15