Specifications - Briggs & Stratton POWER FLOW+ 020770 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Specifications

Model 020770
High Pressure Nozzles
High Flow Nozzles
Water Supply Temperature
min Water Supply Flow Rate
min Water Supply Pressure
Engine Displacement
Spark Plug Gap
Oil Capacity
Model 020771 & 020772
High Pressure Nozzles
High Flow Nozzles
Water Supply Temperature
min Water Supply Flow Rate
min Water Supply Pressure
Engine Displacement
Spark Plug Gap
Oil Capacity
Power Ratings: The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque values are
derived at 2600 RPM for those engines with "rpm" called out on the label and 3060 RPM for all others; horsepower values are derived at
3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are taken with exhaust and air
cleaner installed whereas gross power values are collected without these attachments. Actual gross engine power will be higher than net
engine power and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given the wide array
of products on which engines are placed, the gasoline engine may not develop the rated gross power when used in a given piece of power
equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and
engine-to engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power
for this engine.
*This pressure washer is rated in accordance to the Pressure Washer Manufacturers' Association (PWMA) standard PW101-2010
(Testing and Rating Performance of Pressure Washers).
2800 PSI (193 bar) @ 1.8 GPM (6.8 L/min)*
3.5 GPM (13.25 L/min)* @ 150 PSI (10.3 bar)
41°F (5°C) - 100°F (38°C)
4.5 GPM (17 L/min)
20 PSI (1.38 bar)
3
9.93 in
(163 cc)
0.030 in. (0.76 mm)
16 oz (0.5 L)
3100 PSI (214 bar) @ 2.1 GPM (7.6 L/min)*
4.5 GPM (17 L/min)* @ 150 PSI (10.3 bar)
41°F (5°C) - 100°F (38°C)
5.5 GPM (20.8 L/min)
20 PSI (1.38 bar)
3
11.58 in
(190 cc)
0.020 in. (0.050 mm)
20 oz (0.6 L)
17

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Power flow+ 020771Power flow+ 020772

Tabla de contenido