Cycle Guide - LG DF22WV2E El Manual Del Propietario

Cycle guide

Sensor de Secado (Sensor Dry) cycles
Sensor de Secado (Sensor Dry) cycles utilize LG's
unique dual sensor system to detect and compare
the moisture level in clothes and in the air and adjust
the drying time as needed to ensure superior results.
The dryer automatically sets the dryness level and
temperature at the recommended setting for each
cycle. The estimated time remaining will be shown in
the display.
NOTE
To protect your garments not every dryness level,
temperature, or option is available with every
cycle. See the Cycle guide for details.
Descargado (Downloaded) cycle
If you download a cycle using the SmartThinQ
application, it will be placed in the downloaded cycle
position. Choose the Downloaded cycle to run the
downloaded cycle.
Secado Manual (Manual Dry) cycles
Use Secado Manual (Manual Dry) cycles to select
a specific amount of drying time and a drying
temperature. When a Secado Manual (Manual Dry)
cycle is selected, the Estimated Time Remainng
display shows the actual time remaining in your
cycle. You can change the actual time in the cycle
by pressing Más Tiempo (More Time) or Menos
Tiempo (Less Time).
• The default settings for the Antibacterial cycle are
Alta(High) temperature and Muy Seco(Very Dry).
These default settings cannot be changed.
• Do NOT use this cycle with delicate items or
fabrics.
NOTE
• The Ahorro de Energía(Energy Saver) option
is turned on by default in the Normal Cycle.
Turn off the Ahorro de Energía(Energy Saver)
option for a faster Normal cycle which begins
with heated drying. To turn the Ahorro de
Energía(Energy Saver) default off, press and
hold the Ahorro de Energía(Energy Saver)
button. Encendido(On) or Apagado(off)
appears in the display.
OPERATION 35