U.S.Robotics USR5661A Serie Guía De Instalación Rápida página 5

place of "D"). Click Next. When Windows locates the correct drivers for the U.S. Robotics V.92 PCI
Modem, click Next. When Windows is finished installing the software, click Finish.
To complete the installation, you must select the country in which you plan to operate the
modem. The default country selection for the modem is the United Kingdom. To select a different
country, click Windows Start, Settings, and then Control Panel. Double-click the System icon.
Click the Device Manager tab. Double-click the Modem or Modems category and select U.S.
Robotics V.92 PCI Modem. Click Properties. Click the Region Select tab. Select the country you
will be using the modem in. Click Apply and then click OK. Click OK once more to exit Device
Manager.
Windows Me
You need to install both the U.S. Robotics V.92 PCI Modem Enumerator and the U.S. Robotics V.92
PCI Modem.
Log into Windows. Insert the Installation CD-ROM into your CD-ROM drive. When the Add New
Hardware Wizard appears, select Specify the location of the driver (Advanced) and click Next.
Make sure that Removable Media (Floppy, CD-ROM...) is not selected. Click Specify a location
and type D:\ (If your CD-ROM drive uses a different letter, type that letter in place of "D"). Click
Next. When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Modem
Enumerator, click Next. When Windows is finished installing the drivers, click Finish.
The wizard will then detect and report a search for drivers for U.S. Robotics V.92 PCI Modem.
Choose Specify the location of the driver (Advanced) and click Next. Click Specify a location and
type D:\ (If your CD-ROM drive uses a different letter, type that letter in place of "D"). Click Next.
When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Modem, click Next. When
Windows is finished installing the software, click Finish.
To complete the installation, you must select the country in which you plan to operate the
modem. The default country selection for the modem is the United Kingdom. To select a different
country, click Windows Start, Settings, and then Control Panel. Double-click the System icon.
Click the Device Manager tab. Double-click the Modem or Modems category and select U.S.
Robotics V.92 PCI Modem. Click Properties. Click the Region Select tab. Select the country you
will be using the modem in. Click Apply and then click OK. Click OK once more to exit Device
Manager.
Windows 2000
Log into Windows. When the "Found New Hardware Wizard" screen appears, click Next then
insert the Installation CD-ROM into your CD-ROM drive. Select Search for a suitable driver for my
device (Recommended) and click Next. Click CD-ROM drives and click Next. When Windows
locates the correct drivers for the PCI Simple Communications Controller, click Next. Click Yes to
continue if a "Digital Signature Not Found" screen appears*. When Windows is finished installing
the drivers, click Finish.
Windows XP
Log into Windows. When the Found New Hardware Wizard appears, insert your Installation CD-
ROM into your CD-ROM drive. A "Hardware Installation" warning will appear*. Click Continue
Anyway. When Windows is finished installing the software, click Finish.
4