Chaining Your Yeti; Technical Specifications - Goalzero YETI 400 Manual Del Usuario

Chaining your Yeti:

You can chain your YETI to other YETI 400s to extend runtimes. To chain to
other YETI 400s:
1. Purchase the Anderson Chaining Cable from www.GOALZERO.com
2. Insert the cable connectors into the Anderson PowerPole ports on
the side of each Yeti 400.
3. Make sure both YETIs are completely charged BEFORE chaining.
When additional batteries are chained to the YETI, you will experience
increased charge times – this is a result of having to charge up the chained
batteries in addition to the YETI.
**The YETI 400 is NOT chainable with the YETI 1250 – the internal
batteries are not the same size. You can chain the YETI 400 to the
discontinued EXTREME 350 Power Pack.
8

Technical Specifications

Charge Times
Wall Charger (72W)
Car Charger (30W)
Goal Zero Nomad 20
2x Goal Zero Nomad 20's
Goal Zero Boulder 30
Goal Zero Nomad 100
Battery
Cell Type
Pack Capacity
Lifecycles
Shelf-life
Fuses
Management System
Ports
USB Port (output)
6mm Port
(output, 6mm, green, hexagon)
12V Car Port (output)
110V AC Unit Inverter
(output, 60Hz, pure-sine wave)
220V AC Unit Inverter
(output, 50Hz, pure-sine wave)
UNIVERSAL OR AUSTRALIA (TYPE 1) AC PLUGS
Power Pole Chaining Port
Charging Port
(input, 8mm, blue, circle)
General
Chainable
Weight
Dimensions
Operating Usage Temp.
Certs
Warranty
5 Hrs
13 Hrs
40-80 Hrs
20-40 Hrs
26-52 Hrs
8-16 Hrs
AGM Lead Acid
396Wh (12V, 33Ah)
Hundreds of cycles
Keep plugged in or charge every 3 months
None
Charging and low-battery protection built-in
5V, up to 2.1A (10.5W max), regulated
12V, up to 10A (120W max)
12V, up to 10A (120W max)
110V, 2.6A (300W continuous, 600W surge max)
220V, 1.4A (300W continuous, 600W surge max)
12V, up to 33A (400W max)
14-29V, up to 10A (120W max)
Yes
29 lbs (13.2 kg)
10.25 x 8 x 8 in (26 x 20.3 x 20.3 cm)
32-104 F (0-40 C)
12 Months
9