Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
When connecting the test leads to the DUT (Device Under Test) connect
the common (COM) test lead before connecting the live lead; when
removing the test leads, remove the live test before removing the
common test lead.
The figures on the following pages show how to make basic
measurements.
Measuring ACV/DCV : Auto Sense Function
If the measured voltage is above 660 V ac/dc, ">660Vac/dc"
will appear on the display.
Auto sense mode: The meter displays ACV or DCV whichever is higher
(>0.3V).
If the measured voltage is above 660Vac/dc, "660Vac/dc" will appear on
the display.
5
Publicidad
Tabla de contenido
