Remington Power Pro 500V Instrucciones De Operación página 25

Tool Disassembly and
Assembly
2. Insert buffer into muzzle cap.
3. Screw muzzle cap to barrel assembly.
4. Firmly insert barrel into outer liner assembly with slot side down (see Figure 24).
Barrel Assembly
Buffer
Muzzle Cap
Outer Liner Assembly
Piston
Figure 24 - Inserting Barrel Assembly into Outer Liner Assembly
5. Insert stop into slot on outer liner assembly (see Figure 25).
6. Push stop towards front of tool (see Figure 25).
7. Rotate annular spring until stop is covered (see Figure 26).
Stop
Figure 25 - Replacing Stop
Annular Spring
Stop
Figure 26 - Rotating Annular Spring to Secure Stop
25
114918